A documented electrical record matters when the time comes to sell a property, renew a lease, or work through an insurance claim. Permits pulled, panels upgraded, wiring replaced: that paperwork tells the next buyer or insurer what was done and when. For homeowners in New Berlin who have put off a panel upgrade or a rewire, getting the work on record is often worth as much as the work itself.
We handle electrical repairs, panel work, wiring, lighting, and installations throughout New Berlin and the surrounding Waukesha County area.
Whether you are managing a rental, finishing a basement, or dealing with a breaker that trips every time the dryer runs, call (414) 361-9789 and we will walk through what the job involves before anything is scheduled.
Every quote starts with what the job actually is. A breaker swap is straightforward. A rewire that runs through finished walls is not, because the labor involved in reaching the wiring is part of the cost. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the three things that move a price from one job to the next.
We do not quote a number before we know the scope. When you call, we ask enough questions to give you a realistic picture of what the visit covers and what it will cost. The rate is confirmed before anything is scheduled, so you are not committing to a visit without that information in hand.
Electrical service scheduled without the runaround.
Call (414) 361-9789 and we will tell you what the job involves.
You should not have to chase an electrician for answers, and you should not have to wait until Monday when the problem is happening now. We take calls at any hour, any day, including nights, weekends, and holidays. If a breaker will not reset, an outlet has stopped working, or something is sparking near the panel, that is a reason to call immediately rather than wait for a scheduled window.
For landlords and property managers, access is a common complication. We work around tenant schedules, coordinate with whoever holds the key, and confirm the plan on the call before anyone is dispatched. If the property needs to stay open or occupied during the visit, tell us that when you call and we will account for it in the scope.
For businesses that cannot shut down a circuit during operating hours, we schedule around the hours that work and confirm what has to be de-energized before we start.
Before a small wiring issue turns into a hazard, a call costs nothing and a visit costs less than the repair that follows a fault left too long. An outlet that has never worked might be a tripped GFCI upstream, a loose connection, or a wiring fault that runs back further into the circuit. Any of those is worth finding.
A switch that sparks when you flip it is not a normal sign of wear. It usually means arcing at the connection, which generates heat in the wall cavity. That is the kind of fault that does not announce itself again until it causes a problem somewhere else.
An exterior light that nobody has gotten around to replacing is easy to ignore until the fixture fails completely or the wiring behind it corrodes from exposure. Outdoor fixtures and their circuits take more abuse than indoor ones, and the repair is simpler when the wiring is still intact. We keep your home powered and safe.
Houses of a certain age in New Berlin and across Waukesha County were built with wiring that was never intended to carry the loads a modern household draws. Knob-and-tube wiring, which runs individual conductors through ceramic insulators rather than a sheathed cable, has no ground wire and no capacity for the circuits a contemporary appliance lineup requires. It is not always dangerous left in place, but it cannot be extended, and it cannot support a modern panel without creating a mismatch between what the wiring can carry and what the breaker allows.
Aluminum branch circuit wiring is a separate issue. It was used in a specific period and is still present in a number of homes in this area. The concern is at the connections and terminations, where aluminum behaves differently from copper under load. An inspection can identify where the connections need attention and what the remediation involves.
Not every old wire in a house needs to come out. The scope of a rewire depends on what the wiring is, where it runs, and what the panel and circuits need to support. We assess what is in place, explain what the replacement involves, and give a clear picture of the scope before any work starts. Whole-home rewiring is the right answer when an inspection finds widespread problems. A partial rewire is often enough when the issue is limited to specific circuits or areas.
GFCI and AFCI protection can be added to existing circuits without a full rewire. Arc-fault breakers at the panel protect bedroom and living area circuits. Ground-fault outlets protect kitchen, bathroom, and garage circuits where moisture is a factor. Both are worth adding to an older home that is missing them. Have a look at the electrical services page for the work broken down.
Dealing with a tripping breaker or a dead outlet is harder when a tenant is living in the property. Access has to be arranged, the tenant has to be present or a key has to be arranged, and the work has to be scheduled around their availability. The gap between tenants removes all of that.
An empty unit is the easiest time to run a new circuit, replace a panel, add GFCI protection to a bathroom that is missing it, or deal with wiring that has been flagged on a previous inspection. Nobody is displaced, access is straightforward, and the work can be completed in one visit rather than scheduled around an occupied schedule.
Electrical work here is done to the code this area actually enforces. For landlords preparing a unit for the next lease, that means the work is done correctly and on record before the next tenant moves in.
A smart switch or dimmer is not always a plug-and-play swap. Older wiring without a neutral wire at the switch box can make a standard smart switch incompatible without additional work at the circuit. We assess what is in the box before quoting the installation, so the switch works correctly rather than flickering or failing to connect.
Recessed and LED lighting installations involve more than the fixture itself. The circuit has to carry the load, the box has to be rated for the fixture weight, and the wiring has to reach the new location. We handle the full scope: circuit work, box installation, and the fixture itself.
A ceiling fan requires a box rated for a fan, not just a light fixture. Where no ceiling box exists, we run the wiring and install the correct box before the fan goes up. Replacement of an existing fan is simpler, but we check the box rating and the circuit before the new fan is mounted.
Knob-and-tube replacement is one of the more involved jobs in an older home, because the wiring runs through walls and ceilings that were built around it. We identify the extent of the wiring, explain what replacement involves in terms of access and patching, and scope the job before any walls are opened. The result is a grounded, sheathed circuit that can carry a modern load safely.
We serve New Berlin and the surrounding communities throughout Waukesha County and the neighboring areas. That includes Hales Corners, Elm Grove, Greenfield, Waukesha, and West Allis.
If your address is in this area and you need electrical work handled, call (414) 361-9789 and we will confirm your location is covered.
Permit requirements depend on the type of work and the property. Some jobs, like a panel upgrade or a new circuit addition, typically require a permit before work starts. We confirm what applies at your address during the call and coordinate the permit as part of the job scope, so you do not have to track that down separately.
Yes. A converted space that is being used as a living area, a workshop, or a home office needs circuits sized for that use. Running an extension cord from an existing outlet is not a substitute for proper wiring. We scope what the converted space needs on the call and confirm what the panel can support.
A rental inspection can flag wiring, outlet protection, or panel issues that were not visible during the previous tenancy. Addressing those between tenants is simpler than scheduling repairs around an occupied unit. We can scope an inspection and complete any needed work while the unit is vacant, so the property is ready for the next lease.
Two Level 2 chargers require two dedicated circuits, and the panel needs capacity for both loads running simultaneously. A load calculation determines whether the existing service can carry that or whether a panel upgrade is needed first. We scope that on the call before anything is scheduled.
We handle the electrical work on the property side and contact the utility to coordinate the supply side. Utility involvement is required for any work at or past the meter, and we manage that conversation as part of the job rather than leaving it to you.
It can, particularly on jobs that involve bringing in equipment or materials. If street parking is limited or access is restricted, let us know when scheduling so we can plan for it. On most standard jobs it is not a significant factor.
A workshop running power tools, a compressor, or a welder typically needs dedicated circuits sized for those loads. A standard 15- or 20-amp outlet is not enough for a large compressor or a welder. We assess what equipment will be used and size the circuits accordingly.
Call us at (414) 361-9789 and you get a real answer about what the job involves, what it will cost, and what happens next.
We answer at any hour, any day of the week. We explain what we find before any work begins, and we leave the property clean when the job is done.
One number. One call. One electrician at your door.
Close by, we also take electrical work in: Hales Corners, Greenfield, Brookfield, Pewaukee. Everywhere else we go is in our complete town list.
Below is a plain-language look at the electrical work we handle most often in New Berlin and the surrounding Waukesha County area. Each row covers what the service includes, who it fits best, and a practical note worth knowing before you call. If a job does not fit neatly into one row, call us and we will scope it on the phone.
| Electrical Service | Scope of Work | When You Need It | Good to Know |
|---|---|---|---|
| Wiring & Rewiring | Whole-home rewiring, Partial circuit rewiring, Knob-and-tube replacement, Aluminum wiring remediation | Older New Berlin homes with pre-1960s or aluminum branch wiring | Knob-and-tube wiring was not designed to carry modern electrical loads. We assess what is in place and explain the scope before any work begins. |
| Backup Generator Installation | Transfer switch installation, Dedicated generator circuit, Panel capacity check, Load calculation for generator output | New Berlin homeowners preparing for multi-day winter outages | The transfer switch disconnects the home from the utility line before the generator supplies power. It is the part that makes the system safe for the household and for anyone working on lines outside. |
| Electrical Panel & Service Upgrades | Load calculations, 200-amp service upgrade, Subpanel installation, Permit coordination | Older homes adding EV chargers, new appliances, or renovation circuits | A lot of New Berlin housing stock is still running on 60- or 100-amp service. Upgrading opens room for the circuits a modern home actually needs. |
Call (414) 361-9789 and we will scope your job on the phone, give you a clear price, and get it scheduled at a time that works for you.
(414) 361-9789