When something goes wrong with the wiring in your home or business, the first thing you need is a clear answer about what is causing it and what fixing it actually involves. We handle electrical repairs, panel work, wiring, lighting, and installations throughout Germantown and the surrounding Washington County area. The price is agreed before any work begins, and we are available at any hour, any day of the week, including nights, weekends, and holidays.
Germantown is a town of single-family homes, garages, workshops, and properties that have been added onto and updated over the years. That kind of housing stock generates a specific kind of electrical work: panels that have run out of room, wiring that predates modern load demands, and circuits that were added without documentation. We scope every job on the call so you know what the visit covers before we schedule anything.
A dryer, range, refrigerator, or dishwasher each needs its own circuit. When an existing circuit is shared or undersized for the appliance it feeds, the breaker trips under load and the appliance runs less efficiently. We run the dedicated circuit from the panel, size the wiring correctly for the draw, and confirm the panel has room before the circuit is added. Hot tubs and workshop equipment follow the same logic: the load has to be calculated, the circuit has to be sized for it, and the panel has to have the capacity before the work starts.
Replacing outdated fixtures with recessed or LED lighting involves more than swapping a bulb. The circuit has to carry the fixture load, the box has to be rated for the installation, and the wiring has to be accessible to make the connection cleanly. We handle the circuit work alongside the fixture installation, so the job is done once rather than twice.
An outdoor outlet that is not protected by a weatherproof enclosure and GFCI protection is a code issue and a practical one. We install weatherproof outlets and covers for garages, decks, and exterior walls, run the circuit from the panel, and confirm GFCI protection is in place at the right point in the circuit. In a region where temperatures drop hard and moisture gets into everything, the enclosure rating matters as much as the outlet itself.
A panel where half the breakers are unlabeled or mislabeled is a problem that shows up during every other job. We map circuits back to their outlets and fixtures, label the panel clearly, and note anything that does not match what the wiring should look like. That work pays for itself the next time something trips and you need to find it fast.
An inspection is worth scheduling before a home purchase, after a renovation, or when a property has wiring that has not been reviewed in years. We go through the panel, grounding and bonding, GFCI and AFCI protection, visible wiring condition, and outlet operation. The result is a written report that tells you what is in good shape and what needs attention, without guesswork.
Ceiling fan installation covers both replacement of an existing unit and new installation where no ceiling box currently exists. Running the wiring for a new fan location is part of the job. We also handle subpanel installation when a detached garage or outbuilding needs its own distribution point, and service-entrance and meter upgrades when the panel needs more capacity than the current service entrance can deliver.
You shouldn't have to chase an electrician for answers, especially when the problem is wiring somebody else put in. Older homes and properties that have changed hands a few times often have circuits that were added without permits, outlets that were wired without GFCI protection where it is now required, and panels that were modified in ways that do not match the original installation. Some of that can be corrected in place. Some of it has to come out.
The difference usually comes down to whether the existing wiring is in safe condition and meets current code, or whether it is a risk that cannot be patched around. We assess what is there before recommending a course of action. If a circuit can be brought into compliance with a straightforward correction, we do that. If the wiring itself is the problem, we explain what replacement involves and what it costs before any work begins.
Grounding and bonding are common gaps in older installations. A circuit that was wired before grounding was standard, or one where the ground was connected incorrectly, can be corrected without replacing the full run in many cases. We identify what is missing and explain the fix clearly. We treat your home and its wiring the way we would our own, which means we do not recommend more work than the situation actually calls for.
Before a small wiring issue turns into a hazard, the right call is to get it looked at rather than wait. We take calls around the clock, any day of the year. If a breaker will not reset, an outlet is sparking, or there is a burning smell near the panel, those are not situations to schedule for next week. We are available at any hour, including nights and weekends, and we answer the phone when you call.
For rental properties and businesses that cannot go dark, we work around occupancy. The person who answers the phone can tell you what the visit involves, how long the work is likely to take in a given space, and what access is needed before we arrive. That conversation happens before anything is scheduled, so there are no gaps in what you know going in.
Electrical service scheduled without the runaround.
Call (414) 361-9789 and we will scope the job on the phone.
An outlet that has never worked since you moved in. A switch that sparks when you flip it. An exterior light that has been on the to-do list for two seasons. These are not emergencies, but they are not nothing either. A switch that sparks is a connection that has failed or was never made correctly, and leaving it in place does not make it safer over time. A dead outlet is usually a simple fix, but it can also point to a wiring fault further back in the circuit.
Outdoor lighting is worth addressing before the days get short and the temperatures drop. Running a circuit for an exterior fixture or a weatherproof outlet is a straightforward job when it is scheduled as a standalone, and it becomes more complicated when it is part of a larger repair that could have been avoided.
We keep your home powered and safe. The jobs that feel minor are often the ones with a clear, quick answer. Call and find out what the fix actually involves. See the services page covering electrical work for how the work is handled.
When you call, the first conversation is about what the job involves. The price is confirmed before we schedule anything, and it is based on three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change.
A straightforward outlet replacement on a circuit that is already in good shape costs less than a dedicated circuit run from a panel that needs a load calculation first. A ceiling fan installation in a room with existing wiring costs less than one that requires a new run from the panel. We explain the difference on the call, so you know what you are getting before we arrive.
What would change a quote after the visit starts is finding something that was not visible from the outside: wiring behind a wall that is not in the condition the symptom suggested, or a panel issue that only shows up once the circuit is traced. When that happens, we explain the updated scope and the price before proceeding. Nothing moves forward without your agreement.
A plain answer on repair versus upgrade is part of every call. Ask what the job involves and you get a straight answer.
We serve Germantown and the communities nearby throughout Washington County. That includes Menomonee Falls, Richfield, Lannon, Mequon, and Jackson. If your address is in this part of the county and you need electrical work handled, call and we will confirm whether your location is in range.
We take residential and commercial calls across the area. Older homes, rental properties, new construction, and small businesses are all part of what we handle. The scope and the price are settled on the call before anything is scheduled.
It depends on the panel's current load and available capacity. Some panels have room for the dedicated circuit a Level 2 charger requires without any other work. Others need a breaker slot freed up or a panel upgrade before the circuit can be added. We check that as the first step of any charger installation.
We can assess unpermitted work and tell you what it involves. In some cases the work can be brought into compliance without being fully redone. What is required depends on the type of work, the local authority, and what is actually in place, and we confirm that on the call before scheduling.
Yes, when the scope allows it. Larger projects like a full rewire or a panel upgrade paired with new circuits can be broken into phases so the cost and disruption are spread out. We discuss what can be staged and what needs to be done together when we scope the job on the call.
Not necessarily. A full panel sometimes means a subpanel is the right answer rather than a full service upgrade. It depends on the total load, the condition of the existing service entrance, and what is being added. We assess both options and explain which one fits the situation.
One number. One call. One electrician at your door.
Reach us at (414) 361-9789 any time, day or night.
We will scope the job on the phone, give you the price before we schedule, and get the work handled. Call West Allis Electrical Company and get a straight answer. There are no forms to fill out and no waiting for a callback.
Wiring and panel work covers these nearby towns as well: Menomonee Falls, Mequon, Brookfield. For every town we reach, see our complete town list.
Below is a plain-language look at the electrical work we handle most often in Germantown and the surrounding Washington County area. Each row covers what the service includes, who it fits best, and a practical note worth knowing before you call. If a job does not fit neatly into one row, call us and we will scope it on the phone.
| Electrical Service | Scope of Work | When You Need It | Good to Know |
|---|---|---|---|
| Outlet & Switch Installation | GFCI outlet installation, AFCI outlet installation, Dimmer and smart switch wiring, New outlet rough-in | Remodels, kitchen and bath updates, and code-compliance work | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We confirm what applies at your address before work starts. |
| Electrical Panel & Service Upgrades | Load calculations, 200-amp service upgrade, Subpanel installation, Permit coordination | Older homes adding EV chargers, new appliances, or renovation circuits | A lot of Germantown housing stock is still running on 60- or 100-amp service. Upgrading opens room for the circuits a modern home actually needs. |
| Lighting Installation | Recessed and LED can lights, Exterior and security lighting, Motion sensor lights, Fixture replacement and circuit updates | Homeowners updating interior lighting or adding outdoor coverage | Outdoor lighting along driveways and entries typically runs off a dedicated circuit. We install the circuit and the fixtures in one visit where the panel has the capacity. |
Call (414) 361-9789 and we will scope your job on the phone, give you a clear price, and get it scheduled at a time that works for you.
(414) 361-9789